{"title":"INTEGRATED ENGINEERING INTAKE MANIFOLDS","description":"\u003cp\u003eIE Intake Manifolds produce horsepower and torque gains on your VW or Audi engine by tuning the sizes, shapes, lengths, and volume of the intake runners and plenum. In-house engineers employ cutting-edge motorsport technology to maximize airflow and velocity for ultimate performance. \u003c\/p\u003e\n\u003c!-- split --\u003e \n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [{\n    \"@type\": \"Question\",\n    \"name\": \"H3: Why buy an aftermarket performance intake manifold?\",\n    \"acceptedAnswer\": {\n      \"@type\": \"Answer\",\n      \"text\": \"If you’re planning on upgrading your Audi, Porsche, or VW’s stock cold air intake, then you’ll need to upgrade to an aftermarket intake manifold as well. But aside from enhanced compatibility with other performance mods, our Audi, Porsche, and VW intake manifolds also provide performance gains, improved heat management capabilities, and a more robust engine sound.\"\n    }\n  },{\n    \"@type\": \"Question\",\n    \"name\": \"What makes Integrated Engineering intake manifolds different?\",\n    \"acceptedAnswer\": {\n      \"@type\": \"Answer\",\n      \"text\": \"Our intake manifolds are all cast and CNC machined in the USA. We provide manifolds for most popular Audi, Porsche, and VW models, so whether you’re looking for a VW MK6 GTI intake manifold, VW MK7 GTI intake manifold, or other VW, Audi, or Porsche manifold, we’ve got you covered.\"\n    }\n  },{\n    \"@type\": \"Question\",\n    \"name\": \"What happens when your intake manifold goes bad?\",\n    \"acceptedAnswer\": {\n      \"@type\": \"Answer\",\n      \"text\": \"An intake manifold that no longer effectively brings air into the engine’s cylinders can lead to a number of other issues. Because intake manifolds have a key impact on an an engine’s air-fuel ratio, when they break, this ratio can become severely compromised, becoming too lean or too rich. That in turn can lead to everything from idling trouble to decreased performance and even extra wear on key engine components that could eventually lead to overheating.\"\n    }\n  },{\n    \"@type\": \"Question\",\n    \"name\": \"Can I drive my car with a bad intake manifold?\",\n    \"acceptedAnswer\": {\n      \"@type\": \"Answer\",\n      \"text\": \"It is not recommended due to the poor performance, poor fuel economy, and potential engine damage.\"\n    }\n  },{\n    \"@type\": \"Question\",\n    \"name\": \"How does the intake manifold affect a car?\",\n    \"acceptedAnswer\": {\n      \"@type\": \"Answer\",\n      \"text\": \"Intake manifolds, along with other associated components like the cold air intake itself, bring cold air into the engine’s cylinders to enable combustion to occur. Combustion is the driving force that powers any ICE (internal combusion engine). Therefore intakes and intake manifolds are a key engine component.\"\n    }\n  },{\n    \"@type\": \"Question\",\n    \"name\": \"What are the symptoms of an intake manifold leak?\",\n    \"acceptedAnswer\": {\n      \"@type\": \"Answer\",\n      \"text\": \"Common symptoms of a leaking intake manifold include: • Poor engine performance • Increased fuel consumption • Rough engine idling •\tStrange or abnormal engine noises, including hissing or tapping sounds • Check engine light • Occasionally, visible signs of a leak, such as coolant pooling or oil leaks near the manifold area\"\n    }\n  }]\n}\n\u003c\/script\u003e\n","products":[{"product_id":"ie-18t-transverse-intake-manifold","title":"1.8T Transverse Intake Manifold","description":"\u003ch2\u003eUPGRADE YOUR MANIFOLD FOR ULTIMATE FLOW\u003c\/h2\u003e\n\u003cp\u003eGain market leading power and torque across the entire rpm range with the only true motorsport designed intake manifold available for your transverse 1.8T 20V engine.\u003c\/p\u003e\n\u003ch2\u003eINTAKE MANIFOLD BENEFITS\u003c\/h2\u003e\n\u003cp\u003eYour factory intake manifold is designed to channel air into the engine just well enough to meet stock horsepower levels, leaving room for significant improvement on performance builds utilizing larger than stock turbochargers. IE's 1.8T 20V intake manifold has been designed as a true performance design with major motorsport features. Optimized tuning of the intake manifold runner lengths, diameters, and bellmouths work together to ram more air into the cylinders. The plenum and runners are optimized with computer software for maximum flow. This very specialized design work results in a market leading intake manifold design capable of over 90HP gains!\u003c\/p\u003e\n\u003ch2\u003ePOWER INCREASE\u003c\/h2\u003e\n\u003cp\u003eObsessively engineered and dyno tested, this intake manifold delivers the best power results possible in any condition. Due to the unique plenum, velocity stack, and runner design all setups with GT28 or larger turbos will see gains throughout the mid-high RPM range with very little low-end power sacrifice.\u003c\/p\u003e\n\u003ch2\u003eEASY THROTTLE BODY PLACEMENT\u003c\/h2\u003e\n\u003cp\u003eOur intake manifold allows the throttle body to be installed on either side of the engine bay due to the modular plenum design. The entire plenum disconnects from the runners and can be flipped in either direction allowing you to install the manifold with only minor changes on virtually any turbo setup.\u003c\/p\u003e\n\u003ch2\u003eVELOCITY STACK BELLMOUTH RUNNERS\u003c\/h2\u003e\n\u003cp\u003eSpecialized engineering software was used to research and develop a truly optimized runner and velocity stack design. Aggressively-sized resonance tuned manifold runners and flow tested velocity stacks deliver more air to the cylinder than any other manifold on the market.\u003c\/p\u003e\n\u003ch2\u003eREDUCED TURBOCHARGER LAG\u003c\/h2\u003e\n\u003cp\u003eThe IE manifold provides an optimal balance of power gains while minimizing the loss in spool time and low-end power. Depending on the engine and turbo setup, the manifold will typically result in very little added turbo lag when compared to other manifolds with similar sized runners and plenum.\u003c\/p\u003e\n\u003ch2\u003eDESIGNED, CAST, AND MACHINED IN USA\u003c\/h2\u003e\n\u003cp\u003eIE manifolds are cast from a special self-aging, self-hardening alloy with especially strict requirements for chemical composition. Top of the line Japanese machining centers machine all major surfaces of the parts in one setup, ensuring a perfect fit, finish, and a lifetime of service.\u003c\/p\u003e\n\u003ch2\u003eIE MICRO VACUUM MANIFOLD\u003c\/h2\u003e\n\u003cp\u003eThis manifold includes the IE micro vacuum manifold at no extra charge. This small anodized fitting provides all of the vacuum sources needed without the worry of cluttered lines. Installs fast and easy, providing a sleek and clean solution to plumb your blow-off\/diverter valve, boost gauge, fuel pressure regulator, brake booster, or anything else requiring a vacuum source.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/files\/BMID.png?v=1550601366\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePERFORMANCE CHARTS\u003c\/h2\u003e\n\u003cp\u003eDyno Results +90HP Gain!\u003cbr\u003eTested on a 2.0L stroker engine, large port, PTE 5858 Turbocharger\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/files\/transversedyno.1489778551.png?v=1550601453\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eAir Flow Result Chart\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/files\/transverseairflowresults.1489778550.png?v=1550601496\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - TT 2000-2006 (MK1 - 8N) 1.8T 20V*\u003c\/li\u003e\n\u003cli\u003eAudi - A3 1996-2003 (MK1 - 8L) 1.8T 20V*\u003c\/li\u003e\n\u003cli\u003eAudi - S3 1996-2003 (MK1 - 8L) 1.8T 20V*\u003c\/li\u003e\n\u003cli\u003eVW - Golf 1999-2005 (MK4) 1.8T 20V\u003c\/li\u003e\n\u003cli\u003eVW - GTI 1999-2005 (MK4) 1.8T 20V\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 1999-2005 (MK4)1.8T 20V\u003c\/li\u003e\n\u003cli\u003eVW - Beetle 1998-2011 (1C - 9C - 1Y) 1.8T 20V*\u003c\/li\u003e\n\u003c\/ul\u003e\n*Fitment may require modification to engine bay components. Due to limited space, windshield washer fluid reservoir relocation and custom intercooler piping may need to be fabricated.\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eREQUIRED HARDWARE\u003c\/h2\u003e\n\u003cp\u003eThe manifold is designed for large port and small port cylinder heads. When installing onto a small port cylinder head, we recommend the use of an IE phenolic large port to small port adapter kit. IE part number: IEBAVA16\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the benefit of a modular plenum?\u003c\/strong\u003e\u003cbr\u003eThe two-piece manifold can be easily flipped to put throttle flange on either side, easily adaptable to any big turbo setup.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eWhat kind of power gains will I see?\u003c\/strong\u003e\u003cbr\u003ePower increases are seen in mid-high rpm ranges, depending on turbo setup and displacement.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat else will I need to install?\u003c\/strong\u003e\u003cbr\u003eIntake manifold now includes our micro vacuum manifold to provide connections for all needed accessories. We also offer a full sized stealth vacuum manifold with more ports if needed for your setup. If using our intake manifold on a small port head, we offer a phenolic transition spacer, which makes the connection between the two without any flow-reducing “steps.”\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill I need tuning for this manifold?\u003c\/strong\u003e\u003cbr\u003eFor maximum performance, tuning is recommended. However, if the factory throttle body is used, it is not absolutely necessary. If upgrading to a larger throttle body, tuning is a must.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow does the IE intake manifold compare to others on the market?\u003c\/strong\u003e\u003cbr\u003eOur intake manifold shows the best gains in the mid-high rpm range when compared to any of the competing manifolds. By utilizing our micro vacuum manifold, there are no ugly vacuum ports visible on the top of the manifold, regardless of the plenum orientation. We believe this makes our manifold the most visual appealing piece on the market as well as the first manifold available with the modular plenum design. This makes it versatile, as it can be installed with any intercooler piping\/throttle body setup. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eI see that the intake manifold is large-port only. Can I use this on my small port 1.8T head?\u003c\/strong\u003e\u003cbr\u003eAbsolutely! You can easily install our manifold on your small port head with use of the IEBAVA16 phenolic transition spacer.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIs it necessary to upgrade my fuel rail to install this manifold?\u003c\/strong\u003e\u003cbr\u003eOur manifold was designed to work with the factory fuel rail, without modification required. We do offer a high-flow billet fuel rail for higher horsepower applications, which is also visually desirable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eI see that you offer the manifold in\u003c\/strong\u003e \u003cstrong\u003eraw \u003c\/strong\u003e\u003cstrong\u003eand black powder-coat finish. Is there a benefit to the black finish?\u003c\/strong\u003e\u003cbr\u003eThe black powder-coat finish is not only visually appealing, but it is much easier to keep clean. Raw cast aluminum parts easily collect dirt that is difficult to remove. The powder-coat finish does not show dirt easily and can be easily cleaned.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow do I know if my cylinder head is a small port or large port?\u003c\/strong\u003e\u003cbr\u003eThe cylinder heads are stamped with the three-letter engine code on the front corner, near the #1 cylinder. Only the AEB and AGU engine codes are the large port heads, all other codes are small port and require the IEBAVA16 phenolic transition spacer to be used.\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Raw Finish, 60MM Throttle","offer_id":39471666430091,"sku":"IEIMVA1-RW-60","price":824.99,"currency_code":"USD","in_stock":true},{"title":"Raw Finish, 80MM Throttle","offer_id":39471666462859,"sku":"IEIMVA1-RW-80","price":824.99,"currency_code":"USD","in_stock":true},{"title":"Black Finish, 60MM Throttle","offer_id":39471666495627,"sku":"IEIMVA1-BK-60","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Black Finish, 80MM Throttle","offer_id":39471666528395,"sku":"IEIMVA1-BK-80","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_6452_2.1505842043.jpg?v=1569297227"},{"product_id":"ie-intake-manifold-vw-25l","title":"IE 2.5L 5 Cylinder Intake Manifold (Electric Power Steering Only)","description":"\u003c!-- Created with Shogun. --\u003e\n\u003cdiv class=\"shogun-root\" data-shogun-id=\"5d607a584376ac005108625a\" data-shogun-site-id=\"5829ef6f-f0b0-4b52-b643-dd8894bccc0a\" data-shogun-page-id=\"5d607a584376ac005108625a\" data-shogun-page-version-id=\"5d607a584376ac0051086259\" data-shogun-platform-type=\"shopify\" data-shogun-variant-id=\"5d607a584376ac005108625d\" data-region=\"main\"\u003e\n\u003cdiv id=\"s-276fb3b0-d1aa-40ec-9a3c-5e1febd9d4fa\" class=\"shg-c\"\u003e\n\u003ch2\u003eUPGRADE YOUR MANIFOLD TO UNLOCK FULL POWER\u003c\/h2\u003e\n\u003cp\u003eUnlock your 5 cylinder engine's full power potential! The industry-leading IE 2.5L Intake Manifold provides power gains of over 47HP when coupled with IE Stage 2 manifold software.\u003c\/p\u003e\n\u003ch2\u003eLEADING FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePerformance design delivers a massive 47HP gain\u003c\/li\u003e\n\u003cli\u003eOptimized bellmouth inlets create maximum power\u003c\/li\u003e\n\u003cli\u003ePower and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eDesigned for use with NA and turbo applications\u003c\/li\u003e\n\u003cli\u003e100% engineered, tested, cast, and machined in the USA\u003c\/li\u003e\n\u003cli\u003eHigh quality black powder-coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eBring your 2.5L 5 cylinder VW engine to life with the Integrated Engineering cast intake manifold. The factory 2.5L 5 cylinder intake manifold is designed to channel air into the engine sufficiently well to meet the original horsepower targets while being cost-effective and easy to install. This compromise means that there is room for significant improvement. \u003cbr\u003e\u003cbr\u003eThe IE performance manifold has been designed from the bottom up to put performance first. IE engineers exploit careful tuning of the intake manifold runner lengths and diameters to create a resonance effect that rams more air into the cylinders. The plenum and runner designs have been carefully optimized with computer software for maximum flow, allowing your engine to breathe easier and perform at its best.\u003c\/p\u003e\n\u003ch2\u003eEASY INSTALL WITH FACTORY-LIKE FITMENT\u003c\/h2\u003e\n\u003cp\u003eThe Integrated Engineering 2.5L ultimate power kit has been carefully designed to fit 07K engines while retaining all of your factory components. Through extensive research and development, this intake manifold fits with no modifications to the engine bay, vacuum system, emissions systems, fuel system, or coolant system. With the plenum being larger than the factory, the throttle body placement is moved a small amount, which is easily plumbed to your mass airflow sensor using the included 2.5L manifold air intake kit.\u003c\/p\u003e\n\u003ch2\u003eINCREASED PLENUM VOLUME\u003c\/h2\u003e\n\u003cp\u003eThis plenum on this manifold has been generously sized and shaped to distribute airflow as evenly as possible to all 5 cylinders. The increased internal volume is a massive improvement over the factory piece and ensures a steady supply of air for the engine.\u003c\/p\u003e\n\u003ch2\u003eFLOW TUNED RUNNER DESIGN\u003c\/h2\u003e\n\u003cp\u003eBy using a cast aluminum construction manifold, our engineers are able to properly size and shape the manifold runners and velocity stacks for optimal performance. This runner flow and resonance tuning is a huge contributor to the overall performance of the intake manifold and is not possible to achieve on hand-welded manifolds generally available for this platform. Featuring aggressively sized runners that have been optimally tuned for large power increases throughout the mid-high RPM band. Our engineers employ CFD software to research and develop an optimized runner and bellmouth design, after many revisions to the design they have achieved the best runner shape, size, and velocity stack for the 2.5L application.\u003c\/p\u003e\n\u003ch2\u003eENGINEERING PROCESS\u003c\/h2\u003e\n\u003cp\u003eUnlike other manifolds on the market that are simply welded and made to fit on the car, IE's performance intake manifolds receive special treatment from start to finish. Our engineering department looks at each specific application and designs an intake manifold with a properly sized runner and plenum. Then we begin a series of prototyping and testing countless revisions to the design to ensure optimum performance.\u003cbr\u003e\u003cbr\u003eOur engineers use Computational Fluid Dynamics (CFD) software to optimize the runner and velocity stack (bellmouth) system for proper resonance tuning and airflow. Unlike competitor manifolds, we use this process on each manifold to design the application-specific runner system to maximize airflow delivery to the cylinders.\u003cbr\u003e\u003cbr\u003eOnce the manifold has been designed and flow has been optimized, the 3D models head over to our 3D printing studio to manufacture the initial prototype. The 3D printed manifold is fastened onto our in-house engine dynamometer and in-house chassis dynamometer for testing. To validate the plenum, runner, and bellmouth design, we test each revision in a controlled environment. Once all testing data has been collected, it is analyzed and used to determine if changes are necessary before going into production.\u003c\/p\u003e\n\u003ch2\u003eREQUIRES STAGE 2 SOFTWARE\u003c\/h2\u003e\n\u003cp\u003eSimply installing the manifold itself does not unlock your power potential, you will also need to update the ECU tune to recalibrate it for the increased volume and flow of the new manifold. The IE Stage 2 performance flash for VW 2.5L engines is designed specifically to re-calibrate the naturally aspirated 2.5L engine for use with the IE intake manifold. That is to not only provide more horsepower and torque, but make the driving experience more enjoyable by removing rev hang, increasing throttle response, and increasing the rev limiter. With such a significant power increase, it makes the vehicle much more enjoyable to drive, with plenty of power available until redline. Tune sold separately\u003c\/p\u003e\n\u003ch2\u003eFITMENT RESTRICTIONS\u003c\/h2\u003e\n\u003ch3\u003ePOWER STEERING\u003c\/h3\u003e\n\u003cp\u003eThis manifold will fit all VW 2.5L engines with the electric power steering system. Some later style engines use a hydraulic power steering pump, which sits right below the factory intake manifold. If your car is equipped with a hydraulic power steering pump, this manifold will not fit.\u003c\/p\u003e\n\u003ch3\u003eAUTOMATIC TRANSMISSION TUNE REQUIRED\u003c\/h3\u003e\n\u003cp\u003eAutomatic vehicles require a matching IE TCU Transmission tune to allow high revving of the automatic transmission. The stock automatic tune has internal transmission rev limit controllers that shift before the manifold and software can make the extra power gained through the upgrade. IE's Auto Transmission Tune removes this limiter allowing full advantage of the manifold \u0026amp; tune.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION\u003c\/h2\u003e\n\u003cp\u003eInstallation requires removal of the factory intake manifold, fuel injectors, fuel rail, PCV system components, factory intake, and other factory parts. Although the install is straightforward, serious engine damage can occur from incorrect installation and professional installation is recommended. \u003ca href=\"https:\/\/cdn.performancebyie.com\/guides\/07K_Manifold_IEIMVB1_IEIMVB2%20Install_Guide.pdf\" title=\"IE 2.5L Manifold Install Guide\"\u003eClick here to download the install guide.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eULTIMATE POWER KIT DYNO RESULTS\u003c\/h2\u003e\n\u003cdiv class=\"dyno-container\"\u003e\u003ciframe src=\"https:\/\/tuning.performancebyie.com\/Embed\/Dyno.aspx?pn=IESOCCB\u0026amp;sel=2\" class=\"dyno-graph\" scrolling=\"no\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003ch2\u003eULTIMATE POWER KIT DYNO VIDEO\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/T0mBIRhALxQ\" width=\"560\" height=\"315\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVW - Rabbit 2006-2009 (MK5) 2.5L (restrictions may apply)\u003c\/li\u003e\n\u003cli\u003eVW - Golf 2010-2014 (MK6) 2.5L (restrictions may apply)\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.5L (restrictions may apply)\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2010-2014 (MK6) 2.5L (restrictions may apply)\u003c\/li\u003e\n\u003cli\u003eVW - Jetta SportWagen 2011-2014 (MK6) 2.5L (restrictions may apply)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eREQUIRED HARDWARE\u003c\/h2\u003e\n\u003ch3\u003eIE 2.5L INTAKE MANIFOLD COLD AIR INTAKE KIT\u003c\/h3\u003e\n\u003cdiv\u003eThe IE 2.5L manifold features a larger plenum than the factory plastic manifold resulting in a different throttle body location. A direct install without modifying an existing intake will require the use of our IE 2.5L Manifold Cold Air Intake Kit IE Part Number: IEIMVB2\u003c\/div\u003e\n\u003ch3\u003eIE STAGE 2 INTAKE MANIFOLD ECU SOFTWARE TUNE\u003c\/h3\u003e\n\u003cdiv\u003eAn ECU tune is required to take advantage of the IE intake manifold performance design. The IE 2.5L Stage 2 Manifold Software recalibrates the factory ECU to deliver record-breaking performance gains on the factory engine internals. This perfect marriage of software and hardware increases power output to 180ft\/lbs and 218HP. IE Part Number: IESOVB1\/2\/3\u003c\/div\u003e\n\u003ch3\u003eAUTOMATIC TRANSMISSION TUNE REQUIRED\u003c\/h3\u003e\n\u003cdiv\u003eAutomatic vehicles require a matching IE TCU Transmission tune to allow high revving of the automatic transmission. The stock automatic tune has internal transmission rev limit controllers that shift before the manifold and software can make the extra power gained through the upgrade. IE's Auto Transmission Tune removes this limiter allowing full advantage of the manifold \u0026amp; tune. IE Part Number: IESOCCY1\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e*IE 2.5L Intake Manifold, ECU Software, and Cold Air Intake are also available in a complete discounted Ultimate Power Kit (IE Part Number: IEIMVB3)\u003c\/div\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill this manifold fit my car?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis manifold will fit all VW 2.5L engines from 2005-2013 with the electric power steering system. Some later style engines use a hydraulic power steering pump, which sits right below the factory intake manifold. If installing this on an automatic transmission car you must install a matching automatic transmission tune in order to see the power gains that are in the higher RPM. ECU flash is available for 2005-2014 ECUs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I install this manifold on an automatic transmission car?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! Automatic vehicles require a matching IE TCU Transmission tune to allow high revving of the automatic transmission. The stock automatic tune has internal transmission rev limit controllers that shift before the manifold and software can make the extra power gained through the upgrade. IE's Auto Transmission Tune removes this limiter allowing full advantage of the manifold \u0026amp; tune.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill my factory fuel rail work?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlthough we recommend using our billet fuel rail which compliments the beautiful cast manifold nicely, your factory fuel rail will also bolt up to our intake manifold using the included hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat throttle body can I use with the IE cast intake manifold?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eOur intake manifold is designed for use with the factory throttle body, which is a direct fit. We include the necessary hardware and seal for the throttle body with each intake manifold.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat kind of gains can I expect from the IE intake manifold on my stock 2.5L engine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlong with our software and intake kit, we have shown gains of 48.2bhp over the stock power levels on manual transmission cars revving to 7200rpm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this manifold with my turbo setup, or will it only work for naturally aspirated applications?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We have designed our manifold to offer great gains on any setup, whether naturally aspirated or turbo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this manifold be a direct replacement for my factory intake manifold?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! With our plenum being larger than the factory plenum, the throttle body location is slightly different. It will require the use of our IEIMVB2 intake kit, making the manifold install simple.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":39471169503371,"sku":"IEIMVB1-BK","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_6407_2.1505844835.jpg?v=1583183744"},{"product_id":"ie-phenolic-adapter-vw-audi-18t","title":"IE Phenolic 1.8T Large Port to Small Port Adapter Kit","description":"\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cdiv\u003e• Smooth transition between manifold and cylinder head port sizes\u003c\/div\u003e\n\u003cdiv\u003e• Decreases intake temperatures and increases horsepower\u003c\/div\u003e\n\u003cdiv\u003e• 12.5mm thickness decreases heat transfer drastically\u003c\/div\u003e\n\u003cdiv\u003e• Easily install your IE Transverse 1.8T Intake Manifold on a small port head \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eIE's phenolic transition spacer for your 1.8T engine delivers a smooth transition when installing a large port intake manifold to a small port cylinder head. The 12.5mm heat resistant material also acts as a phenolic spacer greatly reducing intake air temperatures increasing power. Includes all new extended hardware and two new intake manifold gaskets.\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eAudi - TT 2000-2006 (MK1 - 8N) 1.8T 20V engines\u003cbr\u003eAudi - A3 1996-2003 (MK1 - 8L) 1.8T 20V engines\u003cbr\u003eAudi - S3 1996-2003 (MK1 - 8L) 1.8T 20V engines\u003cbr\u003eVW - Golf 1999-2005 (MK4) 1.8T 20V engines\u003cbr\u003eVW - GTI 1999-2005 (MK4) 1.8T 20V engines\u003cbr\u003eVW - Jetta \u0026amp; Jetta GLI 1999-2005 (MK4) 1.8T 20V engines\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20327252721775,"sku":"IEBAVA16","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBAVA16.1.jpg?v=1569301801"},{"product_id":"ie-intake-manifold-kit-vw-mk5-25l-5cyl","title":"VW 2.5L Basic Power Kit, Black","description":"\u003ch2\u003eTRANSFORM YOUR 2.5L ENGINE\u003c\/h2\u003e\n\u003cp\u003eUnlock your VW 2.5L 5 cylinder engine's full power potential with an IE 2.5L Power Kit. Add 40+HP using the IE Performance Intake Manifold and matching 2.5L Stage 2 Software. \u003cem\u003eDoes not fit hydro steering cars, check fitment for more information.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eLEADING FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-on manifold kit provides massive power gain\u003c\/li\u003e\n\u003cli\u003eIncreased rev limit with power all the way to redline\u003c\/li\u003e\n\u003cli\u003eIncludes IE Performance Intake Manifold\u003c\/li\u003e\n\u003cli\u003eIncludes IE Stage 2 Manifold Software\u003c\/li\u003e\n\u003cli\u003eInstall \u0026amp; tune in your own driveway\u003c\/li\u003e\n\u003cli\u003eRemoved speed limiter, improved response, no rev hang\u003c\/li\u003e\n\u003cli\u003eOptional direct-fit IE cold air intake kit (Ultimate Power Kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/t_cQI_pQjLA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED IN ULTIMATE POWER KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIE 2.5L performance intake manifold\u003c\/li\u003e\n\u003cli\u003eIE Stage 2 manifold software\u003c\/li\u003e\n\u003cli\u003eIE PowerLINK tuning cable\u003c\/li\u003e\n\u003cli\u003eIE manifold cold air intake kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED IN BASIC POWER KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIE 2.5L performance intake manifold\u003c\/li\u003e\n\u003cli\u003eIE Stage 2 manifold software\u003c\/li\u003e\n\u003cli\u003eIE PowerLINK tuning cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eADD POWER \u0026amp; A MASSIVE POWER BAND\u003c\/h2\u003e\n\u003cp\u003eThe IE 2.5L Power Kit combines the industry-leading IE performance intake manifold and the IE ECU software tune, this combination maximizes the performance of the factory 5 cylinder engine's potential without adding boost or engine internals. IE Stage 2 software fine-tunes the ECU calibration to match the manifold flow characteristics delivering a higher revving power band and power gains over 40HP \u0026amp; 12TQ (ft-lbs) over stock. \u003c\/p\u003e\n\u003ch2\u003eEASY AT-HOME TUNE INSTALL\u003c\/h2\u003e\n\u003cp\u003eRequired to flash your new tune, IE's DIY Flash Tool allows you to quickly upload your tune from your own garage or driveway. This OBD plug-in device is easy to use with a Windows-powered laptop and WiFi connection. Your new tool also includes the abilities to switch between multiple octane files (available separately), reading and clearing diagnostic codes, upgrading Stages, or flashing back to stock.\u003c\/p\u003e\n\u003ch2\u003eIE COLD AIR INTAKE KIT\u003c\/h2\u003e\n\u003cp\u003eIncluded in Ultimate Power Kits, the IE 2.5L cold air intake kit is designed to make the installation of your new Integrated Engineering 2.5L 5 cylinder intake manifold simple with our direct-fit intake kit. This kit will connect your throttle body to your mass airflow sensor, and place the air filter right behind the driver's side headlight in a partitioned area that only sees fresh airflow. Our specially-made high flow intake pipe features provisions for the valve cover breather, block breather, and SAI pump, so nothing is left unplumbed. The larger IE intake manifold moves the location of the throttle body, factory or other manufacturer cold air intakes will not fit directly and will require modifications to fit. Take this into mind when purchasing a 2.5L Basic Power Kit.\u003c\/p\u003e\n\u003ch2\u003eFITMENT RESTRICTIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER STEERING\u003c\/strong\u003e\u003cbr\u003eThis manifold will fit all VW 2.5L engines with the electric power steering system. Some later style engines use a hydraulic power steering pump, which sits right below the factory intake manifold. If your car is equipped with a hydraulic power steering pump, this manifold will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUTOMATIC TRANSMISSION TUNE REQUIRED\u003c\/strong\u003e\u003cbr\u003eAutomatic vehicles require a matching IE TCU Transmission tune to allow high revving of the automatic transmission. The stock automatic tune has internal transmission rev limit controllers that shift before the manifold and software can make the extra power gained through the upgrade. IE's Auto Transmission Tune removes this limiter allowing full advantage of the manifold \u0026amp; tune.\u003c\/p\u003e\n\u003ch2\u003eIE PERFORMANCE INTAKE MANIFOLD\u003c\/h2\u003e\n\u003cp\u003eThe IE performance manifold has been designed from the bottom up to bring your 2.5L engine to life! IE's performance engineered manifold is the only motorsport designed intake manifold available with precisely tuned runner lengths and diameters. This creates a resonance effect which rams more air into the cylinders. The plenum and runner designs have been carefully optimized with computer software for maximum flow, allowing your engine to breathe easier and perform at its best.\u003c\/p\u003e\n\u003ch2\u003eIE STAGE 2 MANIFOLD SOFTWARE\u003c\/h2\u003e\n\u003cp\u003eThe IE Stage 2 performance flash for VW 2.5L engines is designed specifically to re-calibrate the naturally aspirated 2.5L engine for use with the IE intake manifold. That is to not only provide more horsepower and torque, but make the driving experience more enjoyable by removing rev hang, increasing throttle response, and increasing the rev limiter. With such a significant power increase, it makes the vehicle much more enjoyable to drive, with plenty of power available until red line.\u003c\/p\u003e\n\u003ch2\u003eNO MODIFICATION FITMENT\u003c\/h2\u003e\n\u003cp\u003eThe Integrated Engineering 2.5L ultimate power kit has been carefully designed to fit MK5 07K engines while retaining all of your factory components. Through extensive research and development, this intake manifold fits with no modifications to the engine bay, vacuum system, emissions systems, fuel system, or coolant system. With the plenum being larger than factory, the throttle body placement is moved a small amount, which is easily plumbed to your mass air flow sensor using the included 2.5L manifold air intake kit.\u003c\/p\u003e\n\u003ch2\u003eINCREASED PLENUM VOLUME\u003c\/h2\u003e\n\u003cp\u003eThis plenum on this manifold has been generously sized and shaped to distribute airflow as evenly as possible to all 5 cylinders. The increased internal volume is a massive improvement over the factory piece and ensures a steady supply of air for the engine.\u003c\/p\u003e\n\u003ch2\u003eFLOW TUNED RUNNER DESIGN\u003c\/h2\u003e\n\u003cp\u003eBy using a cast aluminum construction manifold, our engineers are able to properly size and shape the manifold runners and velocity stacks for optimal performance. This runner flow and resonance tuning is a huge contributor to the overall performance of the intake manifold and is not possible to achieve on hand-welded manifolds generally available for this platform. Featuring aggressively sized runners that have been optimally tuned for large power increases throughout the mid-high RPM band. Our engineers employ CFD software to research and develop an optimized runner and bellmouth design, after many revisions to the design they have achieved the best runner shape, size, and velocity stack for the 2.5L application.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION\u003c\/h2\u003e\n\u003cp\u003eInstallation requires removal of the factory intake manifold, fuel injectors, fuel rail, PCV system components, factory intake, and other factory parts. Although the install is straightforward, serious engine damage can occur from incorrect installation and professional installation is recommended. \u003ca href=\"https:\/\/cdn.performancebyie.com\/guides\/07K_Manifold_IEIMVB1_IEIMVB2%20Install_Guide.pdf\" title=\"2.5L Intake Manifold Install Guide\"\u003eClick here to download the install guide.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVW - Rabbit 2006-2009 (MK5) 2.5L (restrictions may apply) \u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.5L (restrictions may apply) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThe included manifold fittings and cold air intake are designed for MK5 platform 2.5L engines. The kit will also fit many MK6 Golf 2010-14, MK6 Jetta 2010-14, and Jetta Sportwagon 2011-14 with some custom modifications and possible fitting alterations.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFITMENT RESTRICTIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER STEERING\u003c\/strong\u003e\u003cbr\u003eThis manifold will fit all VW 2.5L engines with the electric power steering system. Some later style engines use a hydraulic power steering pump, which sits right below the factory intake manifold. If your car is equipped with a hydraulic power steering pump, this manifold will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUTOMATIC TRANSMISSION TUNE REQUIRED\u003c\/strong\u003e\u003cbr\u003eAutomatic vehicles require a matching IE TCU Transmission tune to allow high revving of the automatic transmission. The stock automatic tune has internal transmission rev limit controllers that shift before the manifold and software can make the extra power gained through the upgrade. IE's Auto Transmission Tune removes this limiter allowing full advantage of the manifold \u0026amp; tune.\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":39471671574667,"sku":"IEIMVB4-BK","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/ie_25l_power_kits_03_e36eddb8-aded-4707-8914-b5a342d77283.jpg?v=1583191992"},{"product_id":"ie-port-injection-kit-vw-audi-20t-fsi","title":"IE 2.0T FSI\/TSI Port Injection Hardware Kit | Fits VW MK5, MK6 \u0026 Audi B7, B8, 8P, 8J, C7","description":"\u003ch2\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eREADY TO TAKE YOUR 2.0T TO THE NEXT LEVEL?\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis innovative IE fueling solution uses a modified version of our high-performance Intake Manifold as the base to add a second set of injectors to your direct injected VW or Audi 2.0T engine. This hardware kit unlocks your fueling limit and is able to fuel even the wildest power goals!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eFor race setups only. Requires custom fuel setup, fabrication, removal of emission systems, custom tuning or stand-alone fuel controllers, and should only be attempted by professional builders. \u003cstrong\u003eThis is not a bolt-on kit.  \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eLEADING INTAKE MANIFOLD FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-modified to accept EV1 \u0026amp; EV14 compact fuel injectors\u003c\/li\u003e\n\u003cli\u003ePower and torque gains throughout the entire rpm range\u003c\/li\u003e\n\u003cli\u003eFast onset boost, no loss in spool time\u003c\/li\u003e\n\u003cli\u003eO ring seals no liquid gasket or RTV required\u003c\/li\u003e\n\u003cli\u003eThick wall cast construction for durability\u003c\/li\u003e\n\u003cli\u003eInternal flow-optimized velocity stacks\u003c\/li\u003e\n\u003cli\u003eBlack powder coat finish with black anodized plenum cover\u003c\/li\u003e\n\u003cli\u003e100% engineered, tested, designed, cast, and machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLEADING FUEL RAIL FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for 4 additional fuel injectors on 2.0T FSI \u0026amp; TSI engines\u003c\/li\u003e\n\u003cli\u003eWill accept EV1 \u0026amp; EV14 compact fuel injectors\u003c\/li\u003e\n\u003cli\u003ePerfect for big-power big turbo and race engines\u003c\/li\u003e\n\u003cli\u003eGet past the direct injection \"fuel limit ceiling\"\u003c\/li\u003e\n\u003cli\u003eAdapt to existing fuel system with -6AN inlet\/outlet\u003c\/li\u003e\n\u003cli\u003eDesigned \u0026amp; engineered to fit IE Direct Port Intake Manifold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e2.0T TSI\/TSI DIRECT PORT FUELING LIMITATIONS\u003c\/h2\u003e\n\u003cp\u003eWhen building big power\/big turbo engines for the 2.0T FSI (EA113) or TSI (EA888 Gen1\/2) engine, the stock direct injection fuel system quickly becomes under-spec as power level rise and ultimately limit the power levels achievable due to the low-pressure fuel pump, high-pressure fuel pump, and injectors. DI injector upgrades are very limited and mostly non-existent, even with HPFP and LPFP upgrades most 2.0T FSI\/TSI builds top out at around 500-550HP on pump fuels due to fuel limitations.\u003c\/p\u003e\n\u003ch2\u003eINTRODUCING THE IE 2.0T DIRECT PORT INJECTION KIT\u003c\/h2\u003e\n\u003cp\u003eTo overcome the fueling limitations, IE engineers have designed the ultimate base kit for adding a second set of injectors to your build. The plastic OEM intake manifold is replaced with our own 2.0T FSI\/TSI intake manifold that has been specially modified with injector bungs to accept your choice of EV14 or EV14 compact style fuel injectors using 14mm o rings. The direct port fuel rail includes brackets and hardware to mount to our manifold directly and is machined with -6AN o ring boss inlet and outlet to accept easy-to-source AN fittings to adapt your fuel system. This is the same setup we used on our in-house MK6 GTI drag project to deliver enough fuel for over 700HP!\u003c\/p\u003e\n\u003ch2\u003eCUSTOM INSTALLATION AND SETUP REQUIRED\u003c\/h2\u003e\n\u003cp\u003eThe IE 2.0T FSI\/TSI Direct Port Injection Kit is sold as a base kit only and is not a direct bolt-on solution. Designed to serve as the base of your fuel build only, you or your builder will need to design and source the injectors, fuel line, fuel adapters, fittings, and remaining elements to complete the hardware installation. Custom ECU tuning and a secondary fuel system controller (recommended) will be required, make sure you speak with your builder\/tuner before ordering. Fitment of the fuel rail may require modification to vacuum lines and removal of the PCV system and as such is not recommended for street-driven vehicles and is intended for race builds. Every build and vehicle will differ greatly in setup, no installation guide is provided and should be attempted by a professional engine builder and fabricator only.\u003c\/p\u003e\n\u003ch2\u003eVEHICLE SPECIFIC INSTALL KITS\u003c\/h2\u003e\n\u003cp\u003eDesigned specifically for each individual application, IE Intake Manifold Install Kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. These kits including all needed brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather, vacuum connections, and throttle body. Verify the correct install kit for your vehicle below before ordering. This kit is for the installation of the intake manifold, not to set up the port injection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.0T FSI (EA113) TRANSVERSE KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVW - MK6 Golf R (2012-2013)\u003c\/li\u003e\n\u003cli\u003eVW - MK5 GTI 2.0T FSI (2006-2008)\u003c\/li\u003e\n\u003cli\u003eVW - MK5 Jetta \u0026amp; GLI 2.0T FSI (2005-2008)\u003c\/li\u003e\n\u003cli\u003eAUDI - 8J\/MK2 TTS (2009-2015)\u003c\/li\u003e\n\u003cli\u003eAUDI - 8J\/MK2 TT 2.0T FSI (2008-2010)\u003c\/li\u003e\n\u003cli\u003eAUDI - 8P\/MK2 A3 2.0T FSI (2006-2008)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2.0T FSI (EA113) LONGITUDINAL KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAUDI - B7 A4 2.0T FSI (2005-2008)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2.0T TSI (EA888 GEN 1 \u0026amp; GEN 2) TRANSVERSE KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVW - MK6 GTI 2.0T TSI (2010-2014)\u003c\/li\u003e\n\u003cli\u003eVW - MK5 GTI 2.0T TSI (2008-2010)\u003c\/li\u003e\n\u003cli\u003eVW - MK6 Jetta \u0026amp; GLI 2.0T TSI (2011-2013)\u003c\/li\u003e\n\u003cli\u003eVW - MK5 Jetta \u0026amp; GLI 2.0T TSI (2008-2011)\u003c\/li\u003e\n\u003cli\u003eAUDI - 8J\/MK2 TT 2.0T FSI (2010-2015)\u003c\/li\u003e\n\u003cli\u003eAUDI - 8P\/MK2 A3 2.0T FSI (2008-2013)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2.0T TSI (EA888 GEN 1 \u0026amp; GEN 2) LONGITUDINAL KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAUDI - B8 A4 2.0T TSI (2009-2013)\u003c\/li\u003e\n\u003cli\u003eAUDI - B8 A5 2.0T TSI (2009-2013)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eADDITIONAL INTAKE MANIFOLD FEATURES\u003c\/h2\u003e\n\u003cp\u003eThe Integrated Engineering 2.0T FSI\/TSI\/TFSI intake manifold was carefully designed to provide an effective power increase across the entire rpm range without sacrificing low-end power or spool time. IE engineers have incorporated several true motorsport features into this intake manifold, making it greatly outperform the factory unit, as well as other aftermarket manifolds available. Read below to learn more about individual features of the IE intake manifold.\u003c\/p\u003e\n\u003ch2\u003eUSA CAST ALUMINUM\u003c\/h2\u003e\n\u003cp\u003eIE manifolds are cast from a special self-aging, self-hardening alloy with especially strict requirements for chemical composition. Top of the line Japanese machining centers machine all major surfaces of the parts in one setup, ensuring a perfect fit, finish, and maximum value. The aluminum manifold makes a great replacement for the stock plastic unit, which is a common failure point.\u003c\/p\u003e\n\u003ch2\u003eFLOW TUNED RUNNER DESIGN \u0026amp; VELOCITY STACKS\u003c\/h2\u003e\n\u003cp\u003eDramatic power and torque increases come from making small changes to the runner and velocity stack design. Our engineers have precisely tuned runner length, diameters, and resonance tuning. The IE manifold is the only manifold on the market featuring flow tested velocity stacks that have been optimally tuned for large power increases throughout the entire RPM band. The end result is the best performing intake manifold optimized specifically for 2.0T engines.\u003c\/p\u003e\n\u003ch2\u003eINCREASED PLENUM VOLUME\u003c\/h2\u003e\n\u003cp\u003eThe plenum on this manifold has been generously sized and shaped to distribute airflow as evenly as possible to all 4 cylinders. The 2.4L internal volume is a massive improvement over the factory piece and ensures a steady supply of air for the engine.\u003c\/p\u003e\n\u003ch2\u003ePOWER INCREASE\u003c\/h2\u003e\n\u003cp\u003eWe have carefully engineered and tested this intake manifold in-house to get the best results possible in any condition. Using the latest in Computational Fluid Dynamics (CFD) software, our engineers have optimized the manifold's airflow and power range for virtually any turbocharger. Even on smaller turbos such as VW\/Audi K04 turbos, there are significant power and torque increases throughout the entire rpm range, with no loss in low-end power or spool time. What that means for you is an incredible increase in the driving experience with a bolt-on performance product, with truly no downsides.\u003c\/p\u003e\n\u003ch2\u003eQUICK SPOOL\u003c\/h2\u003e\n\u003cp\u003eWith further careful tuning of the runner diameter and length, the IE manifold provides an optimal balance of power gains throughout the entire powerband with no loss in spool time or low-end power. Even on both smaller and larger turbo setups, the manifold will typically result in no added turbo lag.\u003c\/p\u003e\n\u003ch2\u003eSURFACE FINISH\u003c\/h2\u003e\n\u003cp\u003eTo complement the impressive performance of the manifold design, IE engineers have taken special care to make a visually appealing piece that not only compliments but enhances the look of any engine bay. The beautiful USA cast aluminum surface is powder coated with a satin black finish then all surfaces and ports are machined for an impeccable contrast. The easy to clean powder coat will ensure the manifold stays looking nice for a lifetime.\u003c\/p\u003e\n\u003ch2\u003ePRECISION ENGINEERING\u003c\/h2\u003e\n\u003cp\u003eUnlike other manifolds on the market that are simply welded or cast with larger plenums and made to fit on the car, IE's performance intake manifolds receive special treatment from start to finish. Our engineering department looks at each specific application and designs an intake manifold with a properly sized runner and plenum. Then we begin a series of prototyping and testing countless revisions to the design to ensure optimum performance. Our engineers use Computational Fluid Dynamics (CFD) software to optimize the runner and velocity stack (bellmouth) system for proper resonance tuning and airflow. Unlike competitor manifolds, we use this process on each manifold to design the application-specific runner system to maximize airflow delivery to the cylinders.\u003cbr\u003e\u003cbr\u003eOnce the manifold has been designed and flow has been optimized, the 3D models head over to our 3D printing studio to manufacture the initial prototype. The 3D printed manifold is fastened onto our in-house engine dynamometer and in-house chassis dynamometer for testing. To validate the plenum, runner, and bellmouth design, we test each revision in a controlled environment. Once all testing data has been collected, it is analyzed and used to determine if changes are necessary before going into production.\u003c\/p\u003e\n\u003ch2\u003eVEHICLE FITMENT BY ENGINE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eVW \u0026amp; Audi - 2.0T FSI EA113 Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2005-2008 (B7) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2005-2011 (C6) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 Allroad 2005-2011 (C6) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - TTS 2008-2015 (MK2-8J) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Golf R 2012-2013) (MK6) 2.0T EA113 FSI\/TSI engines\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVW \u0026amp; Audi - 2.0T TSI EA888 Gen 1\/2 Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A4 Allroad 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e engines*\u003c\/li\u003e\n\u003cli\u003eAudi - A5 2008-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2012-2015 (C7 - C7.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2010-2014 (MK6) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2010-2014 (MK6) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - SportWagen 2011-2014 (MK6) 2.0T TSI EA888 Gen 1\/2 engines*\u003c\/li\u003e\n\u003cli\u003eVW - CC 2009-2015 (3C8) 2.0T TSI EA888 Gen 1 \u0026amp; 2 engines*\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T TSI EA888 Gen 1 \u0026amp; 2 engines*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*Does not fit B8\/B8.5 A4 \u0026amp; A5 2.0T TSI engines with 5th injector factory aluminum intake manifolds.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Fits VW \u0026amp; Audi 2.0T FSI EA113 and TSI EA888 Gen 1\/2 engines only, does not fit MK7\/MQB EA888 Gen 3 engines.\u003c\/em\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":39472519282827,"sku":"IEIMVC18-BK","price":1096.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEIMVC_INTAKE_MANIFOLD_07.JPG?v=1569303506"},{"product_id":"intake-manifold-install-kit-2-0t-fsi-ea113-transverse-kit","title":"Intake Manifold Install Kit | 2.0T FSI (EA113) TRANSVERSE KIT","description":"\u003cp\u003e\u003cspan\u003eDesigned specifically for each individual application, IE intake manifold install kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. This kit is designed for the MK5 GTI, Jetta, GLI, MK6 Golf R, 8J TT, \u0026amp; 8P A3 engines, including all brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather, throttle body pipe, and vacuum connections. We also include a barbed fitting to be used for plumbing a boost gauge, as well as a plug to block off the port if not needed. To allow fitment of the IE manifold with the HPFP sensor, we include a relocation banjo, which allows the sensor to be moved out of the way without affecting its operation.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e4 ply black silicone throttle body hose with clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 ply black silicone breather hose with clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoolant pipe bracket with hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDipstick mounting hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDiverter valve mounting hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIAT sensor hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFuel line mount hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBarbed fittings for vacuum connections\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVacuum hose with clamps for OEM vacuum connections\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBanjo fitting with hardware to relocate HPFP sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEVAP adapter fitting\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK6 Golf R (2012-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK5 GTI 2.0T FSI (2006-2008)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK5 Jetta \u0026amp; GLI 2.0T FSI (2005-2008)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8J\/MK2 TTS (2009-2015)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8J\/MK2 TT 2.0T FSI (2008-2010)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8P\/MK2 A3 2.0T FSI (2006-2008)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":33552846848139,"sku":"IEIMVC9","price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEIMVC9.jpg?v=1588200470"},{"product_id":"ie-intake-manifold-install-kit-2-0t-tsi-ea888-gen-1-2-transverse-kit","title":"IE Intake Manifold Install Kit | 2.0T TSI (EA888 GEN 1\/2) TRANSVERSE KIT","description":"\u003cspan\u003eDesigned specifically for each individual application, IE intake manifold install kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. This kit is designed for the MK6 TSI engines, including all brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather, throttle body pipe, and vacuum connections. We also include a barbed fitting to be used for plumbing a boost gauge, as well as a plug to block off the port if not needed.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e4 ply black silicone throttle body hose with clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4 ply black silicone breather hose with clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoolant pipe bracket with hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDipstick mounting hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDiverter valve mounting hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIAT sensor hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFuel line mount hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBarbed fittings for vacuum connections\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVacuum hose with clamps for OEM vacuum connections\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEVAP adapter fitting\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK6 GTI 2.0T TSI (2010-2014)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK5 GTI 2.0T TSI (2008-2010)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK6 Jetta \u0026amp; GLI 2.0T TSI (2011-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK5 Jetta \u0026amp; GLI 2.0T TSI (2008-2011)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8J\/MK2 TT 2.0T FSI (2010-2015)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8P\/MK2 A3 2.0T FSI (2008-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":33552878633099,"sku":"IEIMVC7","price":107.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEIMVC7.jpg?v=1588200765"},{"product_id":"ie-intake-manifold-install-kit-2-0t-tsi-ea888-gen-1-2-longitudinal","title":"IE Intake Manifold Install Kit | 2.0T TSI (EA888 GEN 1\/2) LONGITUDINAL","description":"\u003cp\u003eDesigned specifically for each application, IE intake manifold install kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. This kit is designed for the B8 A4\/A5 TSI engines (chain-drive only), including all brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather and vacuum connections. We also include a barbed fitting to be used for plumbing a boost gauge, and a plug to block off the port if not needed.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 ply black silicone breather hose with clamps\u003c\/li\u003e\n\u003cli\u003eCoolant pipe bracket with hardware\u003c\/li\u003e\n\u003cli\u003eDipstick mounting hardware\u003c\/li\u003e\n\u003cli\u003eDiverter valve mounting hardware\u003c\/li\u003e\n\u003cli\u003eIAT sensor hardware\u003c\/li\u003e\n\u003cli\u003eFuel line mount hardware\u003c\/li\u003e\n\u003cli\u003eBarbed fittings for vacuum connections\u003c\/li\u003e\n\u003cli\u003eVacuum hose with clamps for OEM vacuum connections\u003c\/li\u003e\n\u003cli\u003eEVAP adapter fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - B8 A4 2.0T TSI (2009-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - B8 A5 2.0T TSI (2009-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDoes not fit 2013+ Flex Fuel models with 5th fuel injector manifolds.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":33552900259979,"sku":"IEIMVC10","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEIMVC10.jpg?v=1588200983"},{"product_id":"ie-vw-audi-2-0t-intake-manifold","title":"IE VW \u0026 Audi 2.0T Intake Manifold | Fits FSI \u0026 TSI Gen1\/2 Engines","description":"\u003ch2\u003e\u003cspan\u003eA TRUE PERFORMANCE MANIFOLD\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eGain power and torque across the entire rpm range with no loss in turbo spool time with a true motorsport designed intake manifold for your VW or Audi 2.0T FSI EA113 \u0026amp; TSI EA888 Gen1\/2 engine. The IE 2.0T Intake Manifold has been carefully designed to provide an effective power increase across the entire rpm range with no loss in low-end power or spool time with the ability to be used on any turbo setup, including the stock turbo. This manifold completely replaces the factory failure prone and restrictive plastic manifold with a high-performance USA cast aluminum part that will look amazing, last the life of the vehicle, and add more power! \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eLEADING INTAKE MANIFOLD FEATURES\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePower and torque gains throughout the entire rpm range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFast onset boost, no loss in spool time\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eO ring seals, no liquid gasket or RTV required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo wiring modifications or extensions required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThick wall cast construction for durability\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack anodized velocity stack cover\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack powder-coat finish for a clean look and easy maintenance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e100% engineered, tested, designed, cast, and machined in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBolt-on install kits available for most vehicles\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eVEHICLE SPECIFIC INSTALL KITS\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDesigned specifically for each individual application, IE Intake Manifold Install Kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. These kits including all needed brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather, vacuum connections, and throttle body. Verify the correct install kit for your vehicle below before ordering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.0T FSI (EA113) TRANSVERSE KIT FITMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK6 Golf R (2012-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK5 GTI 2.0T FSI (2006-2008)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK5 Jetta \u0026amp; GLI 2.0T FSI (2005-2008)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8J\/MK2 TTS (2009-2015)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8J\/MK2 TT 2.0T FSI (2008-2010)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8P\/MK2 A3 2.0T FSI (2006-2008)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e2.0T FSI (EA113) LONGITUDINAL KIT FITMENT\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - B7 A4 2.0T FSI (2005-2008)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e2.0T TSI (EA888 GEN 1 \u0026amp; GEN 2) TRANSVERSE KIT FITMENT\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK6 GTI 2.0T TSI (2010-2014)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK5 GTI 2.0T TSI (2008-2010)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK6 Jetta \u0026amp; GLI 2.0T TSI (2011-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - MK5 Jetta \u0026amp; GLI 2.0T TSI (2008-2011)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8J\/MK2 TT 2.0T FSI (2010-2015)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - 8P\/MK2 A3 2.0T FSI (2008-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e2.0T TSI (EA888 GEN 1 \u0026amp; GEN 2) LONGITUDINAL KIT FITMENT\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - B8 A4 2.0T TSI (2009-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAUDI - B8 A5 2.0T TSI (2009-2013)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eREQUIRES MANIFOLD ECU SOFTWARE\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe IE 2.0T Intake Manifold is a true performance designed intake manifold and requires specific tuning to the ECU software to take advantage of the larger plenum volume, runner size, resonance tuning, and velocity stacks to gain the power increase. Simply bolting the manifold on your existing ECU tune is unlikely to gain the optimum power available. Additionally, installing the IE manifold will remove the factory plastic manifold's runner flaps. Removing the runner flaps will cause a check engine light (CEL) and possible rough cold starts, especially in cold weather. Your manifold tune must turn off the runner flap codes to remove the CEL and re-tune the warm-up maps to accommodate for the cold starts. Please ensure your ECU tuner can provide you with manifold software before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVehicle specific manifold tunes are available from IE for certain cars with more being added in the future. See below for a list of available software tunes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eVW MK5 GTI Stage 2 IM Software\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW MK6 GTI Stage 1 IM Software\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW MK6 GTI Stage 1 IM Software\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW MK6 Golf R Stage 2 Pro IM Software\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eUSA CAST ALUMINUM\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eIE manifolds are cast from a special self-aging, self-hardening alloy with especially strict requirements for chemical composition. Top of the line Japanese machining centers machine all major surfaces of the parts in one setup, ensuring a perfect fit, finish, and maximum value. The aluminum manifold makes a great replacement for the stock plastic unit, which is a common failure point.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFLOW TUNED RUNNER DESIGN \u0026amp; VELOCITY STACKS\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eDramatic power and torque increases come from making small changes to the runner and velocity stack design. Our engineers have precisely tuned runner length, diameters, and resonance tuning. The IE manifold is the only manifold on the market featuring flow tested velocity stacks that have been optimally tuned for large power increases throughout the entire RPM band. The end result is the best performing intake manifold optimized specifically for 2.0T engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eINCREASED PLENUM VOLUME\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe plenum on this manifold has been generously sized and shaped to distribute airflow as evenly as possible to all 4 cylinders. The 2.4L internal volume is a massive improvement over the factory piece and ensures a steady supply of air for the engine.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePOWER INCREASE\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWe have carefully engineered and tested this intake manifold in-house to get the best results possible in any condition. Using the latest in Computational Fluid Dynamics (CFD) software, our engineers have optimized the manifold's airflow and power range for virtually any turbocharger. Even on smaller turbos such as VW\/Audi K04 turbos, there are significant power and torque increases throughout the entire rpm range, with no loss in low-end power or spool time. What that means for you is an incredible increase in the driving experience with a bolt-on performance product, with truly no downsides. Larger power gains are to be seen on big turbo setups as well, with a manifold that is tuned for the natural powerband of the 2.0T engines from 3000-7500rpm.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eQUICK SPOOL\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWith further careful tuning of the runner diameter and length, the IE manifold provides an optimal balance of power gains throughout the entire powerband with no loss in spool time or low-end power. Even on both smaller and larger turbo setups, the manifold will typically result in no added turbo lag.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eDIRECT FIT\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe Integrated Engineering 2.0T performance intake manifold has been carefully designed to fit many 2.0T FSI\/TSI (EA113 \u0026amp; EA888 gen1\/gen2) engines while retaining all of your factory components. Through extensive research and development, this intake manifold fits with no modifications to the engine bay, charge piping, vacuum system, emissions systems, fuel system, or coolant system. To make the intake manifold install as painlessly as possible, individual install kits are available separately. Check the Fitment tab to find the install kit for your vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSURFACE FINISH\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eTo complement the impressive performance of the manifold design, IE engineers have taken special care to make a visually appealing piece that not only compliments but enhances the look of any engine bay. The beautiful USA cast aluminum surface is powder coated with a satin black finish then all surfaces and ports are machined for an impeccable contrast. The easy to clean powder coat will ensure the manifold stays looking nice for a lifetime. The top of the manifold features an in-house CNC machined black anodized aluminum velocity port cover that looks amazing in any engine bay.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePRECISION ENGINEERING\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eUnlike other manifolds on the market that are simply welded or cast with larger plenums and made to fit on the car, IE's performance intake manifolds receive special treatment from start to finish. Our engineering department looks at each specific application and designs an intake manifold with a properly sized runner and plenum. Then we begin a series of prototyping and testing countless revisions to the design to ensure optimum performance. Our engineers use Computational Fluid Dynamics (CFD) software to optimize the runner and velocity stack (bellmouth) system for proper resonance tuning and airflow. Unlike competitor manifolds, we use this process on each manifold to design the application-specific runner system to maximize airflow delivery to the cylinders.\u003cbr\u003e\u003cbr\u003eOnce the manifold has been designed and flow has been optimized, the 3D models head over to our 3D printing studio to manufacture the initial prototype. The 3D printed manifold is fastened onto our in-house engine dynamometer and in-house chassis dynamometer for testing. To validate the plenum, runner, and bellmouth design, we test each revision in a controlled environment. Once all the testing data has been collected, it is analyzed and used to determine if changes are necessary before going into production.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eWATER\/METHANOL READY\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eEach runner is ready for individual water\/methanol injection nozzles. The cast and pre-drilled and threaded 1\/8\" NPT ports located on each runner will make installing your water\/meth setup easy. For builds not using water\/methanol injection, you can simply block off the ports using the provided black plugs. This requires a 1\/8\" thread \"elongated\" nozzle to use with our manifold. These nozzles are manufactured by Aquamist and available through aquamist-direct.com for purchase.\u003c\/p\u003e\n\u003ch2\u003eVEHICLE FITMENT BY ENGINE\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eRequires vehicle specific install kit for complete installation.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVW \u0026amp; Audi - 2.0T FSI EA113 Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2005-2008 (B7) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2005-2011 (C6) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 Allroad 2005-2011 (C6) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - TTS 2008-2015 (MK2-8J) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Golf R 2012-2013) (MK6) 2.0T EA113 FSI\/TSI engines\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVW \u0026amp; Audi - 2.0T TSI EA888 Gen 1\/2 Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A4 Allroad 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e engines*\u003c\/li\u003e\n\u003cli\u003eAudi - A5 2008-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2012-2015 (C7 - C7.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2010-2014 (MK6) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2010-2014 (MK6) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - SportWagen 2011-2014 (MK6) 2.0T TSI EA888 Gen 1\/2 engines*\u003c\/li\u003e\n\u003cli\u003eVW - CC 2009-2015 (3C8) 2.0T TSI EA888 Gen 1 \u0026amp; 2 engines*\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T TSI EA888 Gen 1 \u0026amp; 2 engines*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*Does not fit B8\/B8.5 A4 \u0026amp; A5 2.0T TSI engines with 5th injector factory aluminum intake manifolds.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Fits VW \u0026amp; Audi 2.0T FSI EA113 and TSI EA888 Gen 1\/2 engines only, does not fit MK7\/MQB EA888 Gen 3 engines.\u003c\/em\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":33553030905995,"sku":"IEIMVC1-BK","price":979.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEIMVC_INTAKE_MANIFOLD_12_55e6b006-18ec-474f-b354-82249bd0e45d.jpg?v=1588202563"},{"product_id":"ie-manifold-install-kit-b7-a4","title":"IE Manifold Install Kit | 2.0T FSI (EA113) LONGITUDINAL KIT","description":"\u003cp data-mce-fragment=\"1\"\u003eDesigned specifically for each individual application, IE intake manifold install kits are complete with all hardware necessary to install your new IE 2.0T cast intake manifold. This kit is designed for the Audi B7 A4 FSI 2.0T engines, including all brackets to fasten OEM lines and components, as well as couplers to plumb the valve cover breather, coolant system, and vacuum connections. We also include a barbed fitting to be used for plumbing a boost gauge, as well as a plug to block off the port if not needed. To allow fitment of the IE manifold with the HPFP sensor, we include a relocation banjo, which allows the sensor to be moved out of the way without affecting its operation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis is the necessary kit to complete the installation of the IE intake manifold on your Audi B7 A4 FSI.  Only sold complete with all parts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 ply black silicone coolant hose\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4 ply black silicone breather hose with clamps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpper coolant pipe with hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDipstick mounting hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIAT sensor hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFuel line mount hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBarbed fittings for vacuum connections\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVacuum hose with clamps for OEM vacuum connections\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBanjo fitting with hardware to relocate HPFP sensor \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEVAP adapter fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplications:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAudi B7 A4 2.0T FSI.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":39248351953035,"sku":"IEIMVC11","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/co3a9725_2.jpg?v=1614197424"},{"product_id":"ie-mk5-rabbit-jetta-2-5l-intake-manifold-ultimate-power-kit","title":"IE MK5 Rabbit \u0026 Jetta 2.5L Intake Manifold Power Kits (Electric Power Steering Only)","description":"\u003ch2\u003eTRANSFORM YOUR 2.5L ENGINE\u003c\/h2\u003e\n\u003cp\u003eUnlock your VW 2.5L 5 cylinder engine's full power potential with a complete bolt-on IE 2.5L Power Kit. Everything needed to add 40+HP using the IE Performance Intake Manifold and matching 2.5L Stage 2 Software. Available with or without the matching direct-fit IE Cold Air Intake Kit. \u003cem\u003eDoes not fit hydro steering cars, check fitment for more information.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eLEADING FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-on kit provides massive power gain\u003c\/li\u003e\n\u003cli\u003eIncreased rev limit with power all the way to redline\u003c\/li\u003e\n\u003cli\u003eIncludes IE Performance Intake Manifold\u003c\/li\u003e\n\u003cli\u003eIncludes IE Stage 2 Manifold Software\u003c\/li\u003e\n\u003cli\u003eInstall \u0026amp; tune in your own driveway\u003c\/li\u003e\n\u003cli\u003eRemoved speed limiter, improved response, no rev hang\u003c\/li\u003e\n\u003cli\u003eOptional direct-fit IE cold air intake kit (ultimate kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/t_cQI_pQjLA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED IN ULTIMATE POWER KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIE 2.5L performance intake manifold\u003c\/li\u003e\n\u003cli\u003eIE Stage 2 manifold software\u003c\/li\u003e\n\u003cli\u003eIE PowerLINK tuning cable\u003c\/li\u003e\n\u003cli\u003eIE manifold cold air intake kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED IN BASIC POWER KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIE 2.5L performance intake manifold\u003c\/li\u003e\n\u003cli\u003eIE Stage 2 manifold software\u003c\/li\u003e\n\u003cli\u003eIE PowerLINK tuning cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eADD POWER \u0026amp; A MASSIVE POWER BAND\u003c\/h2\u003e\n\u003cp\u003eThe IE 2.5L Power Kit combines the industry-leading IE performance intake manifold and the IE ECU software tune, this combination maximizes the performance of the factory 5 cylinder engine's potential without adding boost or engine internals. IE Stage 2 software fine-tunes the ECU calibration to match the manifold flow characteristics delivering a higher revving power band and power gains over 40HP \u0026amp; 12TQ (ft-lbs) over stock. \u003c\/p\u003e\n\u003ch2\u003eEASY AT-HOME TUNE INSTALL\u003c\/h2\u003e\n\u003cp\u003eRequired to flash your new tune, IE's DIY Flash Tool allows you to quickly upload your tune from your own garage or driveway. This OBD plug-in device is easy to use with a Windows-powered laptop and WiFi connection. Your new tool also includes the abilities to switch between multiple octane files (available separately), reading and clearing diagnostic codes, upgrading Stages, or flashing back to stock.\u003c\/p\u003e\n\u003ch2\u003eIE COLD AIR INTAKE KIT\u003c\/h2\u003e\n\u003cp\u003eIncluded in Ultimate Power Kits, the IE 2.5L cold air intake kit is designed to make the installation of your new Integrated Engineering 2.5L 5 cylinder intake manifold simple with our direct-fit intake kit. This kit will connect your throttle body to your mass airflow sensor, and place the air filter right behind the driver's side headlight in a partitioned area that only sees fresh airflow. Our specially-made high flow intake pipe features provisions for the valve cover breather, block breather, and SAI pump, so nothing is left unplumbed. The larger IE intake manifold moves the location of the throttle body, factory or other manufacturer cold air intakes will not fit directly and will require modifications to fit. Take this into mind when purchasing a 2.5L Basic Power Kit.\u003c\/p\u003e\n\u003ch2\u003eFITMENT RESTRICTIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER STEERING\u003c\/strong\u003e\u003cbr\u003eThis manifold will fit all VW 2.5L engines with the electric power steering system. Some later style engines use a hydraulic power steering pump, which sits right below the factory intake manifold. If your car is equipped with a hydraulic power steering pump, this manifold will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUTOMATIC TRANSMISSION TUNE REQUIRED\u003c\/strong\u003e\u003cbr\u003eAutomatic vehicles require a matching IE TCU Transmission tune to allow high revving of the automatic transmission. The stock automatic tune has internal transmission rev limit controllers that shift before the manifold and software can make the extra power gained through the upgrade. IE's Auto Transmission Tune removes this limiter allowing full advantage of the manifold \u0026amp; tune.\u003c\/p\u003e\n\u003ch2\u003eIE PERFORMANCE INTAKE MANIFOLD\u003c\/h2\u003e\n\u003cp\u003eThe IE performance manifold has been designed from the bottom up to bring your 2.5L engine to life! IE's performance engineered manifold is the only motorsport designed intake manifold available with precisely tuned runner lengths and diameters. This creates a resonance effect which rams more air into the cylinders. The plenum and runner designs have been carefully optimized with computer software for maximum flow, allowing your engine to breathe easier and perform at its best.\u003c\/p\u003e\n\u003ch2\u003eIE STAGE 2 MANIFOLD SOFTWARE\u003c\/h2\u003e\n\u003cp\u003eThe IE Stage 2 performance flash for VW 2.5L engines is designed specifically to re-calibrate the naturally aspirated 2.5L engine for use with the IE intake manifold. That is to not only provide more horsepower and torque, but make the driving experience more enjoyable by removing rev hang, increasing throttle response, and increasing the rev limiter. With such a significant power increase, it makes the vehicle much more enjoyable to drive, with plenty of power available until red line.\u003c\/p\u003e\n\u003ch2\u003eNO MODIFICATION FITMENT\u003c\/h2\u003e\n\u003cp\u003eThe Integrated Engineering 2.5L ultimate power kit has been carefully designed to fit MK5 07K engines while retaining all of your factory components. Through extensive research and development, this intake manifold fits with no modifications to the engine bay, vacuum system, emissions systems, fuel system, or coolant system. With the plenum being larger than factory, the throttle body placement is moved a small amount, which is easily plumbed to your mass air flow sensor using the included 2.5L manifold air intake kit.\u003c\/p\u003e\n\u003ch2\u003eINCREASED PLENUM VOLUME\u003c\/h2\u003e\n\u003cp\u003eThis plenum on this manifold has been generously sized and shaped to distribute airflow as evenly as possible to all 5 cylinders. The increased internal volume is a massive improvement over the factory piece and ensures a steady supply of air for the engine.\u003c\/p\u003e\n\u003ch2\u003eFLOW TUNED RUNNER DESIGN\u003c\/h2\u003e\n\u003cp\u003eBy using a cast aluminum construction manifold, our engineers are able to properly size and shape the manifold runners and velocity stacks for optimal performance. This runner flow and resonance tuning is a huge contributor to the overall performance of the intake manifold and is not possible to achieve on hand-welded manifolds generally available for this platform. Featuring aggressively sized runners that have been optimally tuned for large power increases throughout the mid-high RPM band. Our engineers employ CFD software to research and develop an optimized runner and bellmouth design, after many revisions to the design they have achieved the best runner shape, size, and velocity stack for the 2.5L application.\u003c\/p\u003e\n\u003ch2\u003eINSTALLATION\u003c\/h2\u003e\n\u003cp\u003eInstallation requires removal of the factory intake manifold, fuel injectors, fuel rail, PCV system components, factory intake, and other factory parts. Although the install is straightforward, serious engine damage can occur from incorrect installation and professional installation is recommended. \u003ca href=\"https:\/\/cdn.performancebyie.com\/guides\/07K_Manifold_IEIMVB1_IEIMVB2%20Install_Guide.pdf\" title=\"2.5L Intake Manifold Install Guide\"\u003eClick here to download the install guide.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVW - Rabbit 2006-2009 (MK5) 2.5L (restrictions may apply) \u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.5L (restrictions may apply) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThe included manifold fittings and cold air intake are designed for MK5 platform 2.5L engines. The kit will also fit many MK6 Golf 2010-14, MK6 Jetta 2010-14, and Jetta Sportwagon 2011-14 with some custom modifications and possible fitting alterations.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFITMENT RESTRICTIONS\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePOWER STEERING\u003c\/strong\u003e\u003cbr\u003eThis manifold will fit all VW 2.5L engines with the electric power steering system. Some later style engines use a hydraulic power steering pump, which sits right below the factory intake manifold. If your car is equipped with a hydraulic power steering pump, this manifold will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUTOMATIC TRANSMISSION TUNE REQUIRED\u003c\/strong\u003e\u003cbr\u003eAutomatic vehicles require a matching IE TCU Transmission tune to allow high revving of the automatic transmission. The stock automatic tune has internal transmission rev limit controllers that shift before the manifold and software can make the extra power gained through the upgrade. IE's Auto Transmission Tune removes this limiter allowing full advantage of the manifold \u0026amp; tune.\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":39471671869579,"sku":"IEIMVB3-BK","price":1619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/files\/IEIMVB3-BK_01.jpg?v=1747931902"},{"product_id":"ie-fuel-rail-for-fsi-tsi-port-injection","title":"Port Injection Rail Kit for IEIMVC1","description":"\u003ch2\u003e\u003cspan\u003ePORT INJECTION FUEL RAIL\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis billet fuel rail is engineered for IE's Port Injection Intake Manifold and when combined allows the addition of a second set of fuel injectors to 2.0T FSI\/TSI (EA113 \u0026amp; EA888 Gen1\/2) engines. This listing is for the fuel rail only to be used as either a replacement part or if you are machining your own IE 2.0T Intake Manifold for injectors. \u003cstrong\u003eWill only fit with IE brand Port Injection Manifold or modified Intake Manifold.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003ePort injection setups are for race setups only. Requires custom fuel setup, fabrication, removal of emission systems, custom tuning, or stand-alone fuel controllers, and should only be attempted by professional builders. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eLEADING FUEL RAIL FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAllows for 4 additional fuel injectors on 2.0T FSI \u0026amp; TSI engines\u003c\/li\u003e\n\u003cli\u003eWill accept EV1 \u0026amp; EV14 compact fuel injectors\u003c\/li\u003e\n\u003cli\u003ePerfect for big-power big turbo and race engines\u003c\/li\u003e\n\u003cli\u003eGet past the direct injection \"fuel limit ceiling\"\u003c\/li\u003e\n\u003cli\u003eAdapt to existing fuel system with -6AN inlet\/outlet\u003c\/li\u003e\n\u003cli\u003eDesigned \u0026amp; engineered to fit IE Direct Port Intake Manifold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eThis fuel rail will fit the following vehicles when installed with IE Port Injection Manifold only.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVW \u0026amp; Audi - 2.0T FSI EA113 Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2005-2008 (B7) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2005-2011 (C6) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 Allroad 2005-2011 (C6) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - TTS 2008-2015 (MK2-8J) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T EA113 TFSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Golf R 2012-2013) (MK6) 2.0T EA113 FSI\/TSI engines\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T EA113 FSI engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVW \u0026amp; Audi - 2.0T TSI EA888 Gen 1\/2 Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A4 Allroad 2009-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e engines*\u003c\/li\u003e\n\u003cli\u003eAudi - A5 2008-2015 (B8 - B8.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2012-2015 (C7 - C7.5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2010-2014 (MK6) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2010-2014 (MK6) 2.0T TSI EA888 Gen\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e1\/2\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eengines*\u003c\/li\u003e\n\u003cli\u003eVW - SportWagen 2011-2014 (MK6) 2.0T TSI EA888 Gen 1\/2 engines*\u003c\/li\u003e\n\u003cli\u003eVW - CC 2009-2015 (3C8) 2.0T TSI EA888 Gen 1 \u0026amp; 2 engines*\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T TSI EA888 Gen 1 \u0026amp; 2 engines*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*Does not fit B8\/B8.5 A4 \u0026amp; A5 2.0T TSI engines with 5th injector factory aluminum intake manifolds.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Fits VW \u0026amp; Audi 2.0T FSI EA113 and TSI EA888 Gen 1\/2 engines only, does not fit MK7\/MQB EA888 Gen 3 engines.\u003c\/em\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":39472513777803,"sku":"IEIMVC17","price":208.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEIMVC_INTAKE_MANIFOLD_02_720x_d744d5c6-36bd-46f7-9cfe-e37f6834ab31.jpg?v=1632198585"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/collections\/INTAKE_MANIFOLDS.jpg?v=1555365348","url":"https:\/\/performancebyie.com\/collections\/intake-manifolds\/mk7-gti.oembed","provider":"Integrated Engineering","version":"1.0","type":"link"}