IE Ultimate Crankshaft Girdle Kit for 06A 1.8T 20V
IE Ultimate Crankshaft Girdle Kit for 06A 1.8T 20V
IE Ultimate Crankshaft Girdle Kit for 06A 1.8T 20V
IE Ultimate Crankshaft Girdle Kit for 06A 1.8T 20V
IE Ultimate Crankshaft Girdle Kit for 06A 1.8T 20V

IE Ultimate Crankshaft Girdle Kit for 06A 1.8T 20V

IEBEVA13

Regular price $1,029.99 Save $-1,029.99
Out of Stock
Approximate Ship Date: -TBD-

Free standard shipping in US for orders over $299

Making over 600HP? Protect your 1.8T 06A block from flexing, cracking, or failure under extreme RPM or high horsepower applications. The IE ultimate girdle kit will help protect your race engine from severe main bearing wear or a broken crank.

TECHNICAL DETAILS

This girdle kit uses a 3/8” steel plate to bolt on the underside of your block to reinforce it and prevent it from flexing under high power use. The girdle plate bolts to all of the main journals, using the supplied extended-length ARP main stud kit. It is then sandwiched between the block and the oil pan to keep the block from flexing. This kit includes all lengthened hardware needed to install the girdle plate using IE “Tall Boy” billet main caps.

PRODUCT FEATURES

  • 3/8" steel girdle plate for ultimate stability
  • Girdle installs with billet main caps and ARP hardware
  • Reinforces engine block and main caps
  • Protects mains, bearings, crank, and block from flexing
  • For use with extreme HP and high RPM
  • Manufactured and engineered in the USA

INCLUDED WITH KIT

  • IE Zinc plated girdle plate
  • IE "Tall Boy" billet main caps
  • IE Spec ARP main stud kit
  • Extended hardware for oil pan
  • Extended transmission bolts
  • Extended Oil Pump Chain

REQUIRES MACHINE WORK

Girdle plates require machine work and precise measurements for correct installation, a certified engine technician should perform this. The IE Tall Boy main caps will need to be line honed by an engine machine shop with the supplied IE Spec ARP studs installed, and the nuts torqued to ensure journal circularity. Tall Boy main caps will also need to be measured, and machined flat between the girdle plate and engine block surface. The tolerance for the gap between the girdle plate and the block is 0.001”

INSTALLATION GUIDE

Click here to download install guide

 

VEHICLE FITMENT

  • Audi - A4 1996-2001 (B5 - B5.5) 1.8T 20V (late 06A internal water pump engines only)
  • Audi - A4 2002-2005 (B6) 1.8T 20V engines
  • Audi - A6 1998-2004 (C5) 1.8T 20V engines
  • Audi - A6 Allroad 1998-2004 (C5) 1.8T 20V engines
  • Audi - TT 2000-2006 (MK1 - 8N) 1.8T 20V engines
  • Audi - A3 1996-2003 (MK1 - 8L) 1.8T 20V engines
  • Audi - S3 1996-2003 (MK1 - 8L) 1.8T 20V engines
  • VW - Golf 1999-2005 (MK4) 1.8T 20V engines
  • VW - GTI 1999-2005 (MK4) 1.8T 20V engines
  • VW - Jetta & Jetta GLI 1999-2005 (MK4) 1.8T 20V engines
  • VW - Passat 1998-2005 (B5 - B5.5) (late 06A internal water pump engines only)
  • VW - Beetle 1998-2011 (1C - 9C - 1Y) 1.8T 20V engines