POWERlink on your MMI
The full POWERlink app on your car’s screen: every adjustable feature in your suite, configurable live gauges, and reading and clearing trouble codes.
Watch what’s new · Fall 2026
The 45 TFSI finally gets tuned.
For years, B9.5 A4, A5 and Q5 45 TFSI owners (2021-2025) watched earlier B9 cars get all the tuning. Not anymore. Up to 314 HP on stock hardware, flashed from your phone in minutes.
New for the B9.5 platform
New for the B9 platform
Ask our Mod Gurus or calibrators to name the one iE tune that changes how a car drives the most, and you’ll likely get the same answer: this one. With an engine that’s nearly identical to the MK8 GTI, the B9.5 leaves the factory as a true AWD sleeper. With this tune, the sleeper awakens…
Horsepower · stock vs. CORE
Stock is Audi’s 261 HP rating. +53 HP with no hardware required.
POWERlink Mobile app, AutoProtect™ safety logic, 7,000 RPM limit, Free revving, Speed limiter disabled, Brake boost, Launch control, Start/Stop memory, MMI TrueBoost gauges, Stage 1 maps, 91 & 93 octane maps, Adjustable hardware support, Free lifetime support
This release is Stage 1 CORE only, calibrated for 91 and 93 octane pump gas. No E85 or flex-fuel maps.
2021+ transmission computers are security-locked, so most tuners lower power to stay under factory torque limits. iE wrote custom engine-side code that works with the factory transmission to safely support the extra torque. You get full advertised power without a low-torque file.
The 45 TFSI’s transmission computer can’t be flashed, which caps how much torque a conventional tune can safely send to it.
Our calibration talks to the factory transmission so it can handle increased clutch pressure and torque.
Full advertised output on stock hardware. No reduced-power file, no TCU tune to buy.
Other tunes for this platform mean sending files to a tuner and waiting days. iE is the first to offer a B9.5 tune you load yourself. Plug POWERlink into the OBD port, pair the app and flash it in minutes.
POWERlink V4 goes into the OBD-II port.
Open the POWERlink app on your iPhone or Android phone.
A guided, step-by-step flash. No laptop, no ECU removal.
Live gauges, diagnostics and data logging stay in your pocket.
Required to flash the tune. Already own one? You’re set.
If you drive an earlier B9 A4 with an iE tune, update the POWERlink app. Use your LIVE adjustable features on your CarPlay screen. Better yet: make Siri do it.
This is an interactive demo that simulates the CarPlay experience. Tap the tabs and controls to try it. The real POWERlink app on your car’s screen may look slightly different.
The full capabilities of the POWERlink app on your vehicle’s screen: all the adjustable features included in your tune suite, configurable live gauges, plus read and clear trouble codes.
Siri compatibility allows you to use voice commands to change supported tune settings, delivering a true hands-free experience.
“Set crackles to aggressive.”
“What’s my intake air temperature?”
Upload the features you use most to your CarPlay display, and transform your car’s screen into a performance dashboard displaying intake temps, boost, and more.
Store and share your car’s photo, tune, suite, hardware and LIVE settings, even away from the car. Save custom settings for different driving conditions.
CarPlay integration with Siri applies to 2017-2020 B9 A4 tunes. It is not part of the new 45 TFSI CORE tune.
Not just the tool you flash with once. Update the app to get all of this, on our previously released B9 A4 tunes.
Store and share your car’s photo, tune, suite, installed hardware and LIVE settings, even when you’re nowhere near the car. You’ll also see when an update is ready.
Switch between supported 91 and 93 octane at the pump. Toggle the hardware you’ve installed, and the tune adapts.
Five gauge themes. Logging set to Auto, Manual or Off. Switch units right from the gauge screen.
Hold and drag the bottom bar to put the tools you use most first.
Not sure what fits?
Tell us your exact car and what’s already installed. We’ll tell you what to do next.
Not sure if yours fits?
The CORE tune fits 45 TFSI quattro models only. 2025 Q5: previous-generation 261 HP cars only, not the redesigned 268 HP model. 40 TFSI and front-wheel-drive cars are not supported.
The 45 TFSI finally gets tuned.
For years, B9.5 A4, A5 and Q5 45 TFSI owners (2021-2025) watched earlier B9 cars get all the tuning. Not anymore. Up to 314 hp on stock hardware, flashed from your phone in minutes.
Ask our Mod Gurus which iE tune changes how a car drives the most, and you’ll likely hear: this one. With an engine nearly identical to the MK8 GTI, the B9.5 leaves the factory as a true AWD sleeper. This tune wakes it up.
Stock is Audi’s 261 hp rating. +53 hp with no hardware required.
This release is Stage 1 CORE only, calibrated for 91 and 93 octane pump gas. No E85 or flex-fuel maps.
2021+ transmission computers are security-locked, so most tuners lower power to stay under factory torque limits. iE wrote custom engine-side code that works with the factory transmission, so you get full advertised power without a low-torque file.
The 45 TFSI’s transmission computer can’t be flashed, which caps how much torque a conventional tune can safely send to it.
Our calibration talks to the factory transmission so it can handle increased clutch pressure and torque.
Full advertised output on stock hardware. No reduced-power file, no TCU tune to buy.
Other tunes for this platform mean sending files to a tuner and waiting days. iE is the first to offer a B9.5 tune you load yourself, in minutes.
POWERlink V4 goes into the OBD-II port.
Open the POWERlink app on your iPhone or Android phone.
A guided, step-by-step flash. No laptop, no ECU removal.
Live gauges, diagnostics and data logging stay in your pocket.
If you drive an earlier B9 A4 with an iE tune, update the POWERlink app. Use your LIVE adjustable features on your CarPlay screen. Better yet, make Siri do it.
This is an interactive demo that simulates the CarPlay experience. Tap the tabs and controls to try it. The real POWERlink app on your car’s screen may look slightly different.
The full POWERlink app on your car’s screen: every adjustable feature in your suite, configurable live gauges, and reading and clearing trouble codes.
Use voice commands to change supported tune settings, completely hands-free.
Put the features you use most on your CarPlay display and turn it into a performance dashboard with intake temps, boost and more.
Store and share your car’s photo, tune, suite, hardware and LIVE settings. Save custom settings for different driving conditions.
CarPlay integration with Siri applies to 2017-2020 B9 A4 tunes. It is not part of the new 45 TFSI CORE tune.
Not just the tool you flash with once. Update the app to get all of this on our previously released B9 A4 tunes.
Store and share your car’s photo, tune, suite, installed hardware and LIVE settings, even away from the car. See when an update is ready.
Switch between supported 91 and 93 octane at the pump. Toggle the hardware you’ve installed, and the tune adapts.
Five gauge themes. Logging set to Auto, Manual or Off. Switch units right from the gauge screen.
Hold and drag the bottom bar to put the tools you use most first.
Tell us your exact car and what’s already installed. We’ll tell you what to do next.
Let’s connectThe CORE tune fits 45 TFSI quattro models only. 2025 Q5: previous-generation 261 hp cars only, not the redesigned 268 hp model. 40 TFSI and front-wheel-drive cars are not supported.
Ask about fitment