IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5
IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5
IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5
IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5
IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5
IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5
IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5
IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5

IE Audi 3.0T Cold Air Intake | Fits B8/B8.5 S4 & B8.5 S5

Rated 4.9 out of 5
Based on 67 reviews

IEINCG2A

Regular price $399.99 Save $-20.00
In Stock

Free standard shipping in US for orders over $299

IE S4 & S5 INTAKE SYSTEM

The IE Cold Air Intake system for the 3.0T engine utilizes a built-in velocity stack and ram-air design to dramatically improve airflow and stabilize induction temperatures. You'll immediately feel an improvement in horsepower and torque throughout the entire RPM range while enjoying a unique and addicting supercharger whine that sounds as good as it performs. Upgrade your Audi with the most feature-packed intake available!

INSTANT POWER
ADD +15-25HP/TQ
ON TUNED ENGINES

FLOW OPTIMIZED
VELOCITY STACK
MOTORSPORT DESIGN

OPTIONAL
CARBON FIBER
LID UPGRADE

TUNE COMPATIBILITY

ECU STAGE COMPATIBLE

STOCK

STAGE 1

STAGE 2 SINGLE PULLEY

STAGE 2 DOUBLE PULLEY

POWER TESTING

IE engineers use an extensive array of testing equipment to maximize and verify the performance of the intake design, including digital analysis, flow bench verification, and power testing on our in-house chassis dyno. The result is an authentic motorsport design that instantly adds horsepower, torque, and snappy throttle response. Typical peak gains from our CAI are roughly 15-25+ Horsepower & Torque on a tuned car.

DYNO RESULTS

Dyno chart data was collected on our in-house Dynapack hub dyno on a full bolt-on stage 2 B8 S4 3.0T engine. Testing was performed back-to-back in exacting conditions; the only change made to the vehicle between runs is the swap from a stock intake to the IE Cold Air Intake Kit.

Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors.

" I feel the power
-Jhaval

" can't say enough good things about it
-Ignition Tube

" Best intake design in the market
-Kyle

HIGH-FLOW VELOCITY STACK

Incorporating our true-motorsport velocity stack into the intake design channels the force-fed charge air from the large air filter into the engine cleanly and reduces drag. This creates a very high-inertia environment that speeds up airflow as quickly as possible and without any power-robbing turbulence found in traditional aftermarket intake designs. The velocity stack also acts as a stable and solid foundation for the massive 5" filter and aluminum intake pipe for a reliable and sturdy assembly without any rubbing or rattles.

PRECISION DESIGN

Cutting-edge 3D scanning technology created a digital duplicate of the engine bay, grille, bumper, and hood. This high-resolution environment allows IE engineers to prototype the intake design and ensure an extremely high-end precision fitment. Right out of the box, you will enjoy a perfect and hassle-free installation.

SMOOTH-FLOW COUPLERS

To further cut down on turbulence, the multi-ply silicone adapters incorporate internal stops that perfectly mate each section of your intake together to create a smooth and continuous intake tract.

ALUMINUM INTAKE PIPE

A sturdy aluminum intake pipe ensures no collapsing under high-boost situations commonly found on full silicone designs.

BLACK POWDER COAT

The heat shield, velocity stack, intake pipe, and brackets are all finished in a durable black powder coat for a sleek and sporty appearance as an upgrade to any engine bay.

SIMPLE INSTALL

This Intake fits Audi B8 & B8.5 S4 & S5 3.0T V6 Supercharged engines without modification or installation hassles. The install process is simple and can be done in 30 minutes or less with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allows for natural engine movement which keeps intake components from getting damaged.

" manufactured with great quality parts
-Bailie S.

" very well engineered
-Don

" I was extremely impressed
-Alexander

CARBON FIBER LID (SOLD SEPARATELY)

Upgrade your intake and bring a classy and stylized look to your engine bay with the optional carbon fiber lid upgrade. The carbon shape is specially designed to not only fit your IE intake, but to also conform to the factory engine bay for a 100% perfect fit and finish. A hidden series of install holes under the trim seal on your intake allows for an easy install of our popular carbon fiber lid.

" Perfect fitment, and looks fantastic!
-Scott N.

UNIQUE SOUND

Your factory intake exists to silence and eliminates all engine sound. Installing an IE intake system releases the Audi S class sportiness, including the supercharger whine and engine throttle. The unique velocity stack design produces a classy yet powerful engine note. This level of sound is not heard through other brand intakes and is much more refined.

Check out some customer videos in the slider to hear it for yourself!

 

" extremely satisfied with the sound
-Stew

" Love it!!!!!!!!!
-Kyle

" Honestly, just overall perfect
-Aram

COMPETITIVE ADVANTAGE

IE engineers set out to produce the highest-quality, best-sounding, and leading performance cold air intake available for your Audi. To accomplish this goal, we made sure to design this intake with a market-leading features list. Check out how our design compares against our top competitors.  

FEATURE COMPETITOR A COMPETITOR B COMPETITOR C COMPETITOR D COMPETITOR E IE 3.0T INTAKE

OPTIONAL CF LID

X

X

X

X

VELOCITY STACK

X

X

X

X

5" AIR FILTER

X

X

X

X

HARD INTAKE PIPE

X

MOUNTED FILTER

X

X

X

BUILT-IN SAI

X

X

X

X

MATERIAL

Metal

Carbon fiber

None/etal bracket

Carbon fiber

Metal

Aluminum

IE THROTTLE BODY

For those looking for every ounce of power, this intake kit is direct install with the IE 3.0T Throttle Body Kit. Your throttle body kit will include a larger inlet silicone adapter that creates a perfect high-flow transition from the intake velocity stack directly to the new 80mm throttle body. No modifications or extra adapters are required! *IE Throttle Body Kit sold separately. 

 

FITMENT GUIDE

MAKE MODEL YEAR GENERATION

AUDI

S4

2009-2015

B8 & B8.5

AUDI

S5 Coupe 3.0T

2013-2015

B8.5

AUDI

S5 Coupe

2009-2015

B8 & B8.5

Does not fit early model S5 B8 models with 4.2L V8 engines

Free Ground Shipping!

This intake ships for free within the continental USA *Some restrictions apply

AUDI B8/B8.5 S4 & S5
INTAKE SYSTEM

The IE Cold Air Intake system for the 3.0T engine utilizes a built-in velocity stack and ram-air design to dramatically improve airflow and stabilize induction temperatures. You'll immediately feel an improvement in horsepower and torque throughout the entire RPM range while enjoying a unique and addicting supercharger whine that sounds as good as it performs. Upgrade your Audi with the most feature-packed intake available!

TUNE COMPATIBILITY

ECU STAGE COMPATIBLE

STOCK

STAGE 1

STAGE 2 SINGLE PULLEY

STAGE 2 DOUBLE PULLEY

POWER TESTING

IE engineers use an extensive array of testing equipment to maximize and verify the performance of the intake design, including digital analysis, flow bench verification, and power testing on our in-house chassis dyno. The result is an authentic motorsport design that instantly adds horsepower, torque, and snappy throttle response. Typical peak gains from our CAI are roughly 15-25+ Horsepower & Torque on a tuned car.

DYNO RESULTS

Dyno chart data was collected on our in-house Dynapack hub dyno on a full bolt-on stage 2 B8 S4 3.0T engine. Testing was performed back-to-back in exacting conditions; the only change made to the vehicle between runs is the swap from a stock intake to the IE Cold Air Intake Kit.

Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors.

" I feel the power
-Jhaval

" can't say enough good things about it
-Ignition Tube

" Best intake design in the market
-Kyle

CARBON FIBER LID

(SOLD SEPARATELY)

Upgrade your intake and bring a classy and stylized look to your engine bay with the optional carbon fiber lid upgrade. The carbon shape is specially designed to not only fit your IE intake, but to also conform to the factory engine bay for a 100% perfect fit and finish. A hidden series of install holes under the trim seal on your intake allows for an easy install of our popular carbon fiber lid.

" Perfect fitment, and looks fantastic!
-Scott N.

VELOCITY STACK

Incorporating our true-motorsport velocity stack into the intake design channels the force-fed charge air from the large air filter into the engine cleanly and reduces drag. This creates a very high-inertia environment that speeds up airflow as quickly as possible and without any power-robbing turbulence found in traditional aftermarket intake designs.

PRECISION DESIGN

Cutting-edge 3D scanning technology created a digital duplicate of the engine bay, grille, bumper, and hood. This high-resolution environment allows IE engineers to prototype the intake design and ensure an extremely high-end precision fitment. Right out of the box, you will enjoy a perfect and hassle-free installation.

UNIQUE SOUND

Your factory intake exists to silence and eliminates all engine sound. Installing an IE intake system releases the Audi S class sportiness, including the supercharger whine and engine throttle. The unique velocity stack design produces a classy yet powerful engine note. This level of sound is not heard through other brand intakes and is much more refined.

Check out some customer videos in the slider to hear it for yourself!

" extremely satisfied with the sound
-Stew

" Love it!!!!!!!!!
-Kyle

" Honestly, just overall perfect
-Aram

HIGH-FLOW COUPLERS

To further cut down on turbulence, the multi-ply silicone adapters incorporate internal stops that perfectly mate each section of your intake together to create a smooth and continuous intake tract.

ALUMINUM INLET

A sturdy aluminum intake pipe ensures no collapsing under high-boost situations commonly found on full silicone designs.

BLACK POWDER COAT

The heat shield, velocity stack, intake pipe, and brackets are all finished in a durable black powder coat for a sleek and sporty appearance as an upgrade to any engine bay.

SIMPLE INSTALL

This Intake fits Audi B8 & B8.5 S4 & S5 3.0T V6 Supercharged engines without modification or installation hassles. The install process is simple and can be done in 30 minutes or less with basic tools. The airbox utilizes factory-style mounts that ensure a perfect fit and allows for natural engine movement which keeps intake components from getting damaged.

" manufactured with great quality parts
-Bailie S.

" very well engineered
-Don

" I was extremely impressed
-Alexander

COMPETITIVE ADVANTAGE

IE engineers set out to produce the highest-quality, best-sounding, and leading performance cold air intake available for your Audi. To accomplish this goal, we made sure to design this intake with a market-leading features list. Check out how our design compares against our top competitors.  

FEATURE A B C D IE

OPTIONAL LID

X

X

X

VELOCITY STACK

X

X

X

5" AIR FILTER

X

X

X

HARD INTAKE PIPE

X

MOUNTED FILTER

X

X

BUILT IN SAI

X

X

X

IE THROTTLE BODY

For those looking for every ounce of power, this intake kit is direct install with the IE 3.0T Throttle Body Kit. Your throttle body kit will include a larger inlet silicone adapter that creates a perfect high-flow transition from the intake velocity stack directly to the new 80mm throttle body. No modifications or extra adapters are required! *IE Throttle Body Kit sold separately. 

FITMENT GUIDE

MAKE MODEL YEAR GENERATION

AUDI

S4

2009-2015

B8 & B8.5

AUDI

S5 Coupe

2013-2015

B8.5

AUDI

S5 Coupe

2009-2015

B8 & B8.5

Does not fit early model S5 B8 models with 4.2L V8 engines


average rating 4.9 out of 5
Based on 67 reviews
  • 5 Stars
    61 Reviews
  • 4 Stars
    4 Reviews
  • 3 Stars
    1 Review
  • 2 Stars
    0 Reviews
  • 1 Star
    1 Review
97% of reviewers would recommend this product to a friend
Fitment
Rated 4 out of 5
Quality
Rated 4 out of 5
Value
Rated 4 out of 5
67 Reviews
Reviewed by Rob O.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Better than I expected !

I'm really glad about the positive impact on my Audi S4! The added power and the distinctive sound from the supercharger seem to enhance my driving experience, creating a noticeable transformation. This cold air intake only enhances the ECU tune that I have.

Loading...
Fitment
Rated 5 out of 5
Quality
Rated 5 out of 5
Value
Rated 5 out of 5
Was this helpful?
Reviewed by Ealum k.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Awesome and easy to install

Can tell a difference. Would recommend to anyone.

Loading...
Fitment
Rated 5 out of 5
Quality
Rated 5 out of 5
Value
Rated 5 out of 5
Was this helpful?
Reviewed by Arthur
I recommend this product
Rated 5 out of 5
Review posted

5 Stars

Iykyk

Loading...
Was this helpful?
Reviewed by Cameron
I recommend this product
Rated 5 out of 5
Review posted

5 Stars

Very easy to put in, makes supercharger whine much more noticeable!

Loading...
Was this helpful?
Reviewed by William M.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Great process

Shipped to me in 2.5 days with free shipping, and install took 40 minutes. Everything fit well, but make sure you keep track of all pieces because some are really small. Overall great process for some great supercharger noises that pick up right around 1750 rpm and tell me when to shift.

Loading...
Fitment
Rated 5 out of 5
Quality
Rated 5 out of 5
Value
Rated 4 out of 5
Was this helpful?