EVERYTHING YOU NEED TO KNOW

iE RS7 TURBO TUNES FOR AUDI C7 S6/S7 4.0T

The iE RS7 Turbo Upgrade ECU calibration suite has been developed for the avid horsepower enthusiast seeking an expansive powerband and significant performance boost on E85 and 104 race fuel This turbo upgrade tune is meticulously crafted around complete bolt-ons and the larger factory turbos in the Audi C7 RS7. This upgrade dramatically extends the powerband on regular 91 and 93 pump gas with an exhilarating pull to redline and up to 719Hp and 768ft-lbs of torque on E85. Transform your Audi S6 or S7 into a true twin-turbocharged V8 beast!

LEADING FEATURES

  • Up to 719HP & 768ft-lbs of torque
  • Supports factory RS7 Turbos
  • Builds power higher into the RPM range
  • Minimal boost lag increase
  • Brake boost enabled for rolling launch
  • 91, 93, 104, and E85 fuel maps (AKI)
  • Optimized for factory downpipes

REQUIRED HARDWARE

iRS7 turbochargers require multiple hardware and fueling upgrades to support the higher power output. Use the graph below to verify the additional upgrades required before tuning your vehicle.

PART UPGRADE REQUIREMENT PART NUMBER(S)

Factory RS7 turbos

Required

079145722B
& 079145721B

RS7 turbo inlets

Required

07912957R
& 079129571Q

Air Intake System

Required

See notes below

Upgraded iE HPFP Kit

Required

Upgraded intercooler

Recommended

Aftermarket supplied

Upgraded heat exchanger

Required

Aftermarket supplied

LPFP feed line spillter/reroute kit

Required

Aftermarket supplied

Factory downpipes & CATS

Required

Original stock parts

INTAKE NOTES

Due to the larger turbo inlet of the RS7 turbos, both iE S6/S7 and RS7 air intake systems will require additional parts for installation, as outlined below.

For existing iE S6/S7 Air Intake Systems (IEINCN3), the airbox can be adapted using aftermarket RS7 turbo inlet adapter hose couplers -such as ECS Tuning part number 4348853, available with ECS Tuning RS7 turbo inlets Part Number 4460456.

For iE RS7 Air Intake Systems (IEINCX1), the intake will require two sections of 2.5" ID X 6" long generic silicone couplers. To achieve a cleaner factory look, consider sourcing two of the larger factory C7 RS7 inlet hose couplers instead. These are available under OE Part Number 079129740H (X2) to complete the installation.

RS7 TURBO TRANSMISSION TUNE

RS7 turbos surpasses the factory-set S6/S7 transmission torque limit and requires a matching transmission control unit (TCU) tune calibration. Our corresponding RS7 Turbo TCU tune synchronizes the transmission characteristics to match the larger turbo profiles, incorporating optimized shift points. As you progress through each gear, the DSG will shift at specific RPMs tailored to optimize the RS7 turbo powerband for the fastest acceleration on the road, track, or drag strip. These optimized shift points are active in both Drive mode and Sport Mode. Additionally, you will retain complete manual control of your shift points up to 6800RPM in manual/paddle shift mode.

RS7 Turbo TCU Tune is a free upgrade for existing Stage 1 TCU tune owners.

DSG GEAR SHIFT RPM

1st to 2nd shift

6800 RPM

2nd to 3rd shift

6800 RPM

3rd to 4th shift

6550 RPM

4th - 5th shift

6300 RPM

5th - 6th shift

6250 RPM

6th -7th shift

6200 RPM


" Earned a customer for life
-Brenton

NEXT-LEVEL CUSTOMER SUPPORT

We sweat the details and prioritize customers in everything we do. We want what you want; a simple purchase process with products that exceed expectations. If you have any questions or require support with your tune; our educated customer support team is standing by. Purchasing an iE tune not only guarantees a quality product, it's a promise that you will always have us in your corner.

We have your back / Blais Bros.